TP 560 - PCI Bridge Driver for Windows 95

5.919 bytes

System Support Disks

Document ID: GCOR-3F6F67

TP 560 - PCI Bridge Driver for Windows 95

Applicable to: World-Wide

P/N
560pci

Description
When Windows 95 is installed from scratch on a Thinkpad 560, a Standard PCI bridge is detected and you choose the Windows Default driver which works fine. The next thing that is detected is a PCI Bridge. The Windows default driver is greyed out and you must either provide it with a driver or ignore it and continue.The driver did not exist on any of the existing driver diskettes for the 560. In Windows 95 device manager, the PCI bridge will have an excalmation point beside it.

The oemsetup.inf file in this package is the correct driver.

P/N
560pci

Name & Size (bytes)
560pci.exe : 20513
560pci.txt : 2070

WWW URL(s)
ftp://ftp.pc.ibm.com/pub/pccbbs/mobiles/560pci.txt
ftp://ftp.pc.ibm.com/pub/pccbbs/mobiles/560pci.exe

The files contained in this document have been archived.

Double-click here for more information on the Archive process - .

The files can be obtained

From the IBM PC Company ftp site on the Internet at the address noted above,
(copy & paste the address into your Web Browser, or, if you are connected to an Internotes or Domino server, double-click on the address to hot-link directly to the URL. Note that the file type on the ftp site may be a different file type from the file originally attached to this document - eg .ZIP instead of .EXE)

From the Archive Database -
LN V3 - IBM PC Service Information Archive Database - CD1 1997
LN V4 - IBM PC Service Information Archive Database - CD1a 1997
- : or as indicated below:-

This document was archived on the database - PC Service Info Archive 1998/2 -- Replica ID : 802565E7004DC09A

Note: If the doclink below does not function properly, try using the preview doclink button on the action bar to access the archived document.

Disk Release Date:

11-03-97

Disk Version/Release:

1.00

Additional Information:

This package contains the driver for the PCI Bridge for the ThinkPad 560. Extract the driver onto the hard disk. It will be unpacked t the c:\drivers\w95\bridge directory.

Details:
When Windows 95 is installed from scratch on a ThinkPad 560, a Standard PCI bridge is detected and you choose the Windows Default driver which works fine. The next thing that is detected is a PCI Bridge. The Windows default driver is grayed out and you must either provide it with a driver diskette or ignore it and continue. The driver did not exist on any of the existing driver diskettes for the 560. In Windows 95 device manager, the PCI bridge will have an exclamation point beside it.

The oemsetup.inf file in this package is the correct driver.

This is not a problem on TP 560s that were preloaded with Windows 95.

On a preloaded 560 in device manager there is a PCI Standard Host Bridge listed, but no PCI Bridge.

Impact:
There is no performance impact or actual problem. This is a false error and can be ignored.

Solution:
This package has been released which will correct this false reading.

When prompted for the driver for the PCI Bridge during the install process, look in c:\drivers\w95\bridge. It can also be used after Windows 95 has already been installed through device manager. From device manager select PCI Bridge and click properties then select the driver tab and click the Change driver button. Click the Have disk button and use the c:\drivers\w95\bridge directory. Windows 95 will recognize a 82430MX controller and display it by that name in device manager.

Search Keywords

Disk Category

Utility, Windows 95

Date Created

14-03-97

Last Updated

10-12-98

Revision Date

06-05-2000

Brand

IBM ThinkPad

Product Family

ThinkPad 560

Machine Type

2640

Model

10U; 20U; 50A; 50C; E0A; E0C; F0E; F0G

TypeModel

Retain Tip (if applicable)

Reverse Doclinks
and Admin Purposes

Disk Release Date:	11-03-97
Disk Version/Release:	1.00
Additional Information:	This package contains the driver for the PCI Bridge for the ThinkPad 560. Extract the driver onto the hard disk. It will be unpacked t the c:\drivers\w95\bridge directory. Details: When Windows 95 is installed from scratch on a ThinkPad 560, a Standard PCI bridge is detected and you choose the Windows Default driver which works fine. The next thing that is detected is a PCI Bridge. The Windows default driver is grayed out and you must either provide it with a driver diskette or ignore it and continue. The driver did not exist on any of the existing driver diskettes for the 560. In Windows 95 device manager, the PCI bridge will have an exclamation point beside it. The oemsetup.inf file in this package is the correct driver. This is not a problem on TP 560s that were preloaded with Windows 95. On a preloaded 560 in device manager there is a PCI Standard Host Bridge listed, but no PCI Bridge. Impact: There is no performance impact or actual problem. This is a false error and can be ignored. Solution: This package has been released which will correct this false reading. When prompted for the driver for the PCI Bridge during the install process, look in c:\drivers\w95\bridge. It can also be used after Windows 95 has already been installed through device manager. From device manager select PCI Bridge and click properties then select the driver tab and click the Change driver button. Click the Have disk button and use the c:\drivers\w95\bridge directory. Windows 95 will recognize a 82430MX controller and display it by that name in device manager.

	Search Keywords
	Disk Category	Utility, Windows 95
	Date Created	14-03-97
	Last Updated	10-12-98
	Revision Date	06-05-2000
	Brand	IBM ThinkPad
	Product Family	ThinkPad 560
	Machine Type	2640
	Model	10U; 20U; 50A; 50C; E0A; E0C; F0E; F0G
	TypeModel
	Retain Tip (if applicable)
	Reverse Doclinks and Admin Purposes