|
25.485 bytes |
Service Hints & Tips |
Document ID: MNOK-42QRZR |
Aptiva - 2144/2168 (Service Level H/I) Upgrade processors for Type 1 system board
Applicable to: World-Wide
1060 - Upgrade Processors - Type I-1
Warning:
Processors are sensitive to static discharge. See "Handling ESD-Sensitive Parts".
- Adapter cards (1035) if applicable.
2144 - 
2168 -
- Left drive support bracket (1010) - .
- Right drive support bracket (1015) - .
- To remove the processor, raise the socket lever, remove the old processor, insert the upgrade processor, then lower the socket lever firmly.
- When installing, be certain the dot on the processor is aligned with the dot in the socket.
Notes:
1. Determine which type of processor you are installing and make sure the jumpers are set correctly.
2. Run the Setup Utility after installing a processor.
Figure 1-17. Processor Upgrade - Type I-1
|
Search Keywords |
| |
|
Hint Category |
Processors, Hardware Installation/Configuration, System Boards | |
|
Date Created |
30-11-98 | |
|
Last Updated |
14-12-98 | |
|
Revision Date |
14-12-99 | |
|
Brand |
IBM Aptiva | |
|
Product Family |
Aptiva | |
|
Machine Type |
2144, 2168 | |
|
Model |
900; 910; 911; 91W; 914; 921; 92W; LB0; KB0; LL1; L10; K10; LL2; L20; K20; KU6; X10; Y10; Z10; X20; Y20; Z20; 120; 121; 123; L11; L15; L16; K25; K26; U11; U15; U16 | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |