12.805 bytes

Service Hints & Tips

Document ID: MIGR-47SUP8

Network Station - AS/400: R370 (NSM R2.x) Reference - II10309

Applicable to: World-Wide

AS/400: R370 (NSM R2.x) Reference - II10309

The IBM Network Station Manager license program you order is 5648-B07 (5648B07). However, please note that all references to this product on the AS/400 system and on-line information (including the installation command) will refer to the product as 5733-A07 (5733A07).

This document contains information specific for the IBM Network Station Manager for AS/400 systems using Version 3 Release 7. Since this document will be updated on a regular basis, it is suggested that you refer to it on a regular basis.

Related Documents Available

For an index of related documents, refer to document II10405 - AS/400: Network Station Reference.

Note: Document (insert) contains Version 4 Release 1 and document (insert) contains Version 4 Release 2 specific information which can be ignored when you are using OS/400 Version 3 Release 7. To link to (insert) immediately, click here . To link to (insert) immediately, click here .

Release 3 of Network Station Manager is now available. To obtain this release, you must order product 5648C05 to receive CDs containing the license program and the required AS/400 PTFs (for OS/400 systems at release V3R7, V4R1, V4R2 and V4R3).

For ordering information, please visit our Web site at: http://service.boulder.ibm.com/nc/index.shtml .

Important: Licensed program 5733A07 is not Y2K compliant. You must upgrade to licensed program 5648C05 to be Y2K complaint. It is necessary to remove the current version of Network Station Manager (5733A07) before installing the new release (5648C05). To remove the current version, you should use the DLTLICPGM command and specify Licensed Program 5733A07. Note that removing the current version of the product does not remove all your user preferences and configuration information. In fact, release 3 will migrate the current user preferences as needed.

You must also remove any and all of the Network Station browsers (products 5648B08, 5648B10, 5648B18, and 5648B20) before installing release 3 of the Network Station Manager. Note that the NC Navigator (40-bit) browser is included in the new release of the Network Station Manager.

Note: After installing the release 3 of NSM you will no longer have to refer to this document. Instead, refer to document 13495121 which will include the latest Network Station Manager release 3 information. To link to 13495121 immediately, click here .

Initial PTFs Required

Before installing the IBM Network Station Manager Release 2.5+(5733A07) for AS/400, you are required to apply the set of PTFs identified below:
ProductPTF Number
5716999MF18199
MF15335
5716SS1SF36775
SF37417
SF37740
SF40506
SF40771
SF42432
SF42555
SF43497
SF44213
SF44582
SF45336
SF45471
SF46337
5716TC1SF42663

Group PTF for NSM (Manager)

The list of PTFs documented here contains the most current set of PTFs available for the IBM Network Station Manager (5733A07) for AS/400 systems at OS/400 Version 3 Release 7.

It is strongly suggested you obtain and apply the complete set of 5733A07 PTFs documented here so your AS/400 system is at the latest level.

For your convenience, we have made a Group PTF for the IBM Network Station Manager PTFs. This way you can simply order the single PTF 5733A07-SF99081 and all of the PTFs included in the group (which is the entire set described in the list below) will be ordered.

Note that SF99081 may only be requested through ECS, and the PTFs in the list will be delivered on media (CD). If you prefer to obtain the PTFs electronically, you may order each PTF in the list individually rather than ordering SF99081.

Note: Applying the latest OS/400 Cumulative PTF package will not necessarily result in a complete set of the latest Network Station PTFs; customers are advised to obtain the most recent group PTF SF99081 in order to obtain the latest Network Station code levels.
ProductPTF Numbers Included in Group PTF SF99081 - 5733A07

SF40964
SF41351
SF41458
SF41459
SF41480
SF41535
SF41570
SF41674
SF41948
SF42091
SF42784
SF42958
SF44523
SF45205
SF45206
SF45208
SF45210
SF45219
SF45220
SF45221
SF45222
SF45223
SF45224
SF45252
SF45404
SF45647
SF45655
SF45656
SF45660
SF45661
SF45663
SF46238
SF46345
SF46580
SF46751
SF46994
SF47276
SF47569
SF48446

Notes:

  1. These PTFs can all be applied IMMEDIATE.
  2. Most of the PTFs in this list contain common special instructions which relay the following:



3. The PTF SF46345 contains the 2.9.7 boot monitor image. Information about the changes to the boot monitor image can be found in document 13505806. To link to 13505806 immediately, click here .

Browser PTFs for Release 2.5+

For your convenience this section provides a list of PTFs available for the browsers supported on the IBM Network Station. These PTFs are for the license products shown, the browser applications are Version 3 Release 2 LPPs, so these PTFs will show as R320 PTFs.


Important Information: As of 11/24/97, if the customer applies the Group PTF SF99081 (R370 and higher), and has the IBM or NC Navigator installed, then the customer must also apply the appropriate PTFs (shown above with an asterisk (*)).

Series 1000 (Model 8362) Network Station

As of 11/21/97, the Group PTF SF99081 provides support for the IBM Network Station Series 1000; this is type 8362. Additional information about the support for the Series 1000 Network Station can be found in the general information document, 13505806. To link to 13505806 immediately, click here .

Note: The Series 1000 Network Stations can boot from a R370 or higher AS/400 (R320 does not support the 8362 model Network Stations).

Java Virtual Machine 1.1.2

As of 11/21/97, the Group PTF SF99081 provides support for the Java Virtual Machine (JVM) version 1.1.2. More information about the support for JVM version 1.1.2 can be found in the general information document (insert) .

Browser Support

The PTFs provided in the Group PTF 5733A07-SF99081 includes all of the enablement support for the NC Navigator Browser (License Programs 5648-B10 and 5648-B20). Therefore, be sure to apply these PTFs if you plan on using the NC Navigator Browser on your IBM Network Stations.

To support the NC Navigator, changes to the Network Station Manager configuration files are performed by some of these PTFs. Therefore, once this set of PTFs is on your system you should not remove them unless you have a plan to re-install them (or the most current set of PTFs at the time).

Note: Additional information concerning both the NC Navigator and the IBM Network Station Browser can be found in the general information document (insert) .

The NSM (Manager) Browse... Option

When using the IBM Network Station Manager to customize user configurations, you need to change the authority to QYTCMCLS in library QYTC in order for the Browse... option to work correctly. Follow the steps provided here at your AS/400 command prompt:

  1. EDTOBJAUT OBJ(QYTC/QYTCMCLS) OBJTYPE(*PGM)
  2. Press F6 to Add new users.
  3. Specify QTMHHTP1 and *USE as the user and object authority respectively.
  4. Press Enter.
  5. Press Enter.


Search Keywords

Document Category

General Information, Installation Guides, System Administration Tools, User Guides

Date Created

12-05-99

Last Updated

11-05-99

Revision Date

12-11-99

Brand

IBM Network Station, Network Computers

Product Family

Network Station, AS/400 - Network Station, NT Server - Network Station, OS/2 Warp Server - Network Station, RS/6000 - Network Station, S/390 OS/390 - Network Station, S/390 VM/ESA - Network Station

Machine Type

8361, 8362

Model

All

TypeModel

Retain Tip (if applicable)

Reverse Doclinks
and Admin Purposes