NETFINITY 7000 M10 FAN MONITOR STATUS NOT CORRECT


Subject: NETFINITY 7000 M10 FAN MONITOR STATUS NOT CORRECT
New Netfinity server RETAIN Tip: 

    Record number:       H167002
    Device:              D/T8680
    Model:               M
    Hit count:           UHC00006
    Success count:       USC0000
    Publication code:    PC50
    Tip key:
    Date created:        O99/02/12
    Date last altered:   A99/07/22
    Owning B.U.:         USA


Abstract: NETFINITY 7000 M10 FAN MONITOR STATUS NOT CORRECT


SYMPTOM:

Power backplane firmware reports wrong status.


PROBLEM ISOLATION AIDS:


FIX:

Download and apply the current firmware for the power backplane from the following URL:

http://www.pc.ibm.com/searchfiles.html

search on "Advanced System Management Processor Firmware"
(file should be release Version 2.02 or later)


DETAILS:

In the IBM Netfinity 7000 M10 the Netfinity manager software monitors for the fans may not indicate the correct status.
If the fan goes off line the status monitor will still indicate idle.
Alerts and log entries are correct; it is just the monitor that is incorrect.


Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.