Subject: NO VIDEO DURING POST after REBOOT OR POWER CYCLE
New Netfinity server RETAIN Tip:
Record number: H165838
Hit count: UHC00000
Success count: USC0000
Publication code: PC50
Date created: O99/01/28
Date last altered: A99/02/01
Owning B.U.: USA
Abstract: NO VIDEO DURING POST after REBOOT OR POWER CYCLE
The system displays NO video during POST which may be accompanied by POST beeps (beep code varies) after a reboot or power cycle. This symptom occurs only in a dual processor system if the processor stepping levels are different.
PROBLEM ISOLATION AIDS:
400/100MHz, 512KB Processor Upgrade Option P/N 10L5884 (FRU 10L5882)
-= OR =-
350/100MHz, 512KB Processor Upgrade Option P/N 10L5883 (FRU 10L5881)
Contact the HelpCenter for instructions.
In the U.S., contact the IBM HelpCenter at 1-800-772-2227, to receive instructions.
Outside the U.S., contact your appropriate geography's HelpCenter.
In EMEA, please contact the appropriate IBM Help Desk.
NOTE: EMEA Contact Numbersailable on the web at the following URL:
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.