Subject: PUSHDOWN TAB in BAY 3 INTERFERES with TAPE DRIVE FUNCTION
Updated Netfinity server RETAIN Tip:
Record number: H165264
Hit count: UHC00013
Success count: USC0000
Publication code: PC50
Date created: O98/11/11
Date last altered: A98/12/15
Owning B.U.: USA
Abstract: PUSHDOWN TAB in BAY 3 INTERFERES with TAPE DRIVE FUNCTION
Push-down tab in Bay 3 interferes with Tape Drive function.
Unable to remove cartridge from TR4 or TR5 tape drives.
PROBLEM ISOLATION AIDS:
Shell has been EC'd to remove the tab. It is not needed.
Tab must be reformed upward to clear option in Bay 3, but not too far which would interfere with Bay 2.
Proper tab deflection is achieved by pushing upward on the tab until the lowest part of its curved surface is approximately 1.25mm (0.050") below the top of Bay 3.
Be careful not to deflect the tab too far.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.