Subject: 10/100 ETHERJET PCI ADAPTER: POOR PERFORMANCE, DISCONNECTS
New Netfinity server RETAIN Tip:
Record number: H165120
Hit count: UHC00000
Success count: USC0000
Publication code: PC50
Date created: O98/10/21
Date last altered: A98/10/21
Owning B.U.: USA
Abstract: 10/100 ETHERJET PCI ADAPTER: POOR PERFORMANCE, DISCONNECTS
When running the network in Full Duplex mode, the network may be running slowly, or network disconnection's may occur.
PROBLEM ISOLATION AIDS:
Manually turn on Full Duplex mode instead of allowing the adapter to auto-negotiate.
You will need to manually set Full Duplex in the network switch, as well as in the Server and the Client device driver for the adapter.
The problem is caused by a network switch that does not support auto negotiation mode.
As with any network adapter, if the hub or switch is configured for full duplex and does not support auto negotiation, then you must use the device driver manual overrides for proper operation in full duplex mode.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.