PROCESSOR NOT REPORTED correctly, AFTER a PROCESSOR goes BAD

Subject: PROCESSOR NOT REPORTED correctly, AFTER a PROCESSOR goes BAD
New Netfinity server RETAIN Tip: 

    Record number:       H165140
    Device:              D/T8680
    Model:               M
    Hit count:           UHC00000
    Success count:       USC0000
    Publication code:    PC50
    Tip key:             008
    Date created:        O98/11/02
    Date last altered:   A98/11/02
    Owning B.U.:         USA


Abstract: PROCESSOR NOT REPORTED correctly, AFTER a PROCESSOR goes BAD

TEXT:

POST does not report correct processor after a processor going bad.

SYMPTOM:

On the subsequent reboot after replacing a bad processor, the POST will display incorrect processor status information.
The newly replaced good processor may still be reported as a bad processor.

PROBLEM ISOLATION AIDS:

•  The system is a Netfinity 7000 M10, Type 8680, any Model.
•  System is configured with two (2) or more processors.
•  The system's Diagnostics pass.

WORKAROUND:

After replacing the bad processor with the good processor, reboot the system.
The POST will report erroneous information.
Ignore this and boot the system to the operating system.
Shut down and restart the system again and POST should report the new and correct information.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.