"90" POWER SYSTEM ERRORS NOT REPORTED on the FRONT PANEL

Subject: "90" POWER SYSTEM ERRORS NOT REPORTED on the FRONT PANEL
New Netfinity server RETAIN Tip: 

    Record number:       H164907
    Device:              D/T8680
    Model:               M
    Hit count:           UHC00001
    Success count:       USC0000
    Publication code:    PC50
    Tip key:
    Date created:        O98/10/14
    Date last altered:   A98/10/14
    Owning B.U.:         USA


Abstract: "90" POWER SYSTEM ERRORS NOT REPORTED on the FRONT PANEL

SYMPTOM:

Errors created by over voltage conditions will not be displayed in the Front Panel although they are being logged in the System Error Log. On an abrupt system shut down due to a catastrophic failure, refer to the System Error Log (F1 at POST) and these errors will be seen.

PROBLEM ISOLATION AIDS:

•  The system is a Netfinity 7000 M10 server, Type 8680, any Model.

FIX:

The next level of SP code 31A will put the error message on the front panel.

WORKAROUND:

If failure occurs and system shuts down, you need to remove AC power to reset system.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.