ECA014: NETFINITY 7000 POWER CORD/RECEPTACLE COMPATIBILITY


Subject: ECA014: NETFINITY 7000 POWER CORD/RECEPTACLE COMPATIBILITY
Updated Netfinity server RETAIN ECAxxx: 

     Record number:       H164030
     Device:              D/T8651         Service code:      33
     ECA number:          ECA014          Parts source:      LOC
     EC number:           EC000000        Publish flag:      R
     Mandatory:           N               Hit count:         UHC00028
     Automatic shipment:  N               Success count:     USC0000
     Availability date:   98/02           Publication code:  PC50
     Plant of control:    23              Date created:      O98/01/27
     Tip key:                             Date last altered: A98/09/14
                                          Owning B.U.:       USA


Abstract: ECA014: NETFINITY 7000 POWER CORD/RECEPTACLE COMPATIBILITY


PURPOSE:

This ECA provides for the removal of a 220 Volt/16 Amp AC Power Assembly, 220 Volt/16 Amp Line Cord, and the installation of a 220 Volt/10 Amp AC Power Assembly and country specific 220 Volt/10 Amp Line Cord on the IBM Netfinity 7000 type 8651 model TH0/TM0 to allow for supplying AC power to the server using the more common 220 Volt/10 Amp wall receptacle specific to some countries.

One (1) 220 Volt/10 Amp AC Power Assembly, one (1) 220 Volt/10 Amp Line Cord, and Instruction Sheet are contained in the following FBM Kits respective to the countries that this ECA applies to:

   Country                                                FBM Kit
   China ------------------------------------------------ 03K9151
   Australia / New Zealand / Papua New Guinea / Argentina 03K9152
   Italy / Chile / Ethiopia / Libya / Somalia ----------- 03K9153
   Denmark ---------------------------------------------- 03K9154
   Switzerland / Liechtenstein -------------------------- 03K9155


Refer to the Instruction Sheet contained in the FBM Kit for replacement of the AC Power Assembly in the Server or refer to the Hardware Maintenance Manual (P/N 06J0791) for the Netfinity 7000.

   FEATURES:
   Type,                  Machines Affected
   Model,   With          and/or Feature/Device     B/M to be    Service  Syste
   Stage    B/M           Description               Installed    Hours    Hours
   8651     B/M0000000    NETFINITY 7000 TYPE       B/M0000000   00.7     00.5
                          8651 MODEL TH0/TM0
                          LOCATED IN THE ECA014
                          SPECIFIED COUNTRIES
                          THAT MAY REQUIRE 10AMP
                          AC POWER CONNECTION.


PHYSICAL CHECK:


PREREQUISITES: NONE


COMPANION: NONE


CONCURRENT: NONE


DETAIL:

This ECA replaces the Server's 220 Volt/16 Amp Power Assembly (FRU P/N 12J3264) with a 220 Volt/10 Amp AC Power Assembly (FRU P/N 03K8966) to allow use of the more common 220 Volt/10 Amp Power Cord specific to the counties specified in this ECA that may only have a 220 Volt/10 Amp wall receptacle.

  1.  Have the Local Administrator Down the Network Operating system.
  2.  Power down the Server.

    Note: Refer to the Instruction Sheet that was packed
      in the FBM Kit or, Refer to the Hardware Maintenance
      Manual for the Netfinity 7000; the "AC Power Assembly"
      section describes the following steps in detail:

  3.  Remove the Hot-Swap Power Supplies.
  4.  Remove the 5-Volt Regulator Card.
  5.  Remove the 16 Amp AC Power Assembly.
  6.  Install the 10 Amp AC Power Assembly.
  7.  Install the 5-Volt Regulator Card.
  8.  Install the Hot-Swap Power Supplies.
  9.  Power on the Server, check the Server's Power Supply Status
     Indicators to be sure that all the Hot-Swap Power supplies
     are operating correctly (refer to the Hardware Maintenance
     Manual for the Netfinity 7000, see the "Status Indicators"
     section).


NOTES:

THIS ECA IS "AS REQUIRED".
ONLY IBM AUTHORIZED SERVICERS MAY APPLY THIS ECA.

THIS ECA WILL EXPIRE 10/13/2004

****************************************************************

FOR NORMAL SERVICE ACTIVITY IN THE COUNTRIES SPECIFIC TO THIS
ECA USE THE FOLLOWING FRU P/N'S:

   Country                                          10 Amp  16 Amp
   China ------------------------------------------ 02K0546 01K9851
   Australia/New Zealand/Papua New Quinea/Argentina 13F9940 12J5128
   Italy/Chile/Ethiopia/Libya/Somalia ------------- 14F0069 12J6126
   Denmark ---------------------------------------- 13F9997 55H6646
   Switzerland/Liechtenstein ---------------------- 14F0051 55H6646


NOTE: 10 Amp Power Assembly requires 10 Amp Power Cord, 16 Amp Power Assembly requires 16 Amp Power Cord.

****************************************************************

WHEN IMPLEMENTING THIS ECA:

Country Specific FBM kits must be ordered using
Code B and reference ECA014 (Any orders for the FBM
kits under normal FBM replacement parts will be rejected).

Discard the 16 AMP Power Assembly and 16 Amp Cord.


USA:

This ECA does not apply to any servers in the USA or any
other country in North America, due to the Electrical
Standards used.


EMEA:

PSS: CE's should record all time and parts to Service
Code 33, (8651) ECA014, Other Office 990.

BUSINESS PARTNERS: Refer to Warranty Claim System;
Use Emergency Warranty Claim type 5 (ECA), quoting
CPPS ECA Code: M/T 8651 = "SE"


Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.