NETFINITY 3500: NOS INSTALL fails REBOOT on OPEN BAY SYSTEM

Subject: NETFINITY 3500: NOS INSTALL fails REBOOT on OPEN BAY SYSTEM
New Netfinity server RETAIN TIP: 

     Record number:       H164215
     Device:              D/T8644
     Model:               M
     Hit count:           UHC00000
     Success count:       USC0000
     Publication code:    PC50
     Tip key:
     Date created:        O98/07/21
     Date last altered:   A98/07/22
     Owning B.U.:         USA

Abstract: NETFINITY 3500: NOS INSTALL fails REBOOT on OPEN BAY SYSTEM

SYMPTOM:

•  The following error is displayed upon reboot of the System  either during Network Operating System installation or after  installation is complete:

    "Operating System Not Found"

  PROBLEM ISOLATION AIDS:

    All of the following must be true for this TIP to apply:

•  The System is a Netfinity 3500 server Type 8644 model 10U, 10X, 20U, 20X, 30U, 30X  configured with one or more supported SCSI hard drives.
•  The System is configured with, or is in the process of being configured with any Supported Network Operating System.
•  The System BIOS is revision 29A or lower.

FIX:

This issue will be fixed in the next BIOS released for this System. This TIP will be updated at that time.

WORKAROUND:

Manually add the hard drive to the startup sequence as follows:

1.  Cold boot the System.
2.  Press <F1> when prompted during System Boot.
3.  Select "Start Options" from the "Configuration/Setup" Menu.
4.  Select "Start Sequence" from the "Start Options" Menu.
5.  Scroll to the desired startup device (ie: 1st, 2nd, etc) using the up / down keys.
6.  Select HDD using the left / right keys.
7.  Press <ESC> two times to exit
8.  Press <enter> for "yes" to exit the setup utility from the "Exit Setup" screen.
    System will reboot.
9.  Continue to complete installing the Operating System if it had not completed.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.