Repair Information (Aptiva 2165 - SL-A)
Removals and Replacements
BEFORE REMOVING any FRU,
POWER-OFF THE COMPUTER UNPLUG ALL POWER CORDS from ELECTRICAL OUTLETS,
then DISCONNECT any INTERCONNECTING CABLES.
-ATTENTION- The System board, processors, adapter cards, DIMMs, and
upgrade processors can be damaged by electrostatic discharge.
Use an electrostatic discharge (ESD) strap to establish personal grounding.
If you don't have an ESD strap, establish personal grounding by touching a ground point
with one hand before touching the static-sensitive FRUs.
Identifying the Parts of the System Unit
The Arrows in the removals and replacements procedures show the direction of movement to remove
a field-replaceable unit (FRU), to turn a screw, or the direction to press a tab to release the FRU.
Begin all removals by removing the cover (and rear cover, if applicable).
When other FRUs must be removed prior to removing the failing FRU, they are listed at the top of the page.
Go to the removal procedure for each FRU listed.
Remove the FRU, and then continue with the removal of failing FRU.
To replace a FRU, reverse the removal procedure and follow any notes that Pertain to replacement.
Before disconnecting any cables, note their location and orientation.
Reinstall any new FRUs with cabling in their original location.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.