Chapter 1. Prerequisites
Before installing the UMA program, make sure you have the following installed on your computer:
- Operating System: Windows 95 with OEM Service Release 2, Windows 98, Windows NT
Workstation 4.0 with Service Pack 3 or later, or Windows NT server 4.0 with Service Pack 3 or later.
The operating system must be set up to accept long file names.
- Internet Browser: Microsoft Internet Explorer 3.0 (Version 3.02 or later) or Internet Explorer 4.0
(Version 4.72.2106.8 or later). If your browser does not meet these requirements, you can download
the latest Internet Explorer browser from the Microsoft Web site at
The UMA program works best with Internet Explorer 4.0.
- Network Support: You must have TCP/IP installed.
- Memory: 32MB minimum.
- Processor: Pentium® (or equivalent) 133MHz minimum
Note: Performance is affected by processor speed, the amount of memory installed, and other
applications and programs that are running concurrently with UMA. Additional memory
(or increased virtual memory) might be required depending on the memory requirement for other
applications and programs that will run concurrently with UMA.
The UMA program is supported for installation on the following models:
- IBM PC 300GL, PC 300PL, PC 300XL models.
- Selected IBM ThinkPad, IntelliStation, and Netfinity server models.
For a detailed list, see the UMA Web site at:
Note: Throughout this document, the term "client" is used to describe any computer on
which the UMA program (IBM System Management Tools) has been or will be installed using the Typical Client or
Custom Client installation method.
For example, if the UMA program was installed on a server using the Typical Client or Custom Client
installation method, that server is a UMA client. For the purpose of this document, computer on which UMA
components have been or will be installed using the Enterprise Console Integration method only are not UMA clients.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.