Aptiva 2137-SL A Product Overview

  Aptiva 2137-SL A Product Overview


The Machine Type 2137 contains three PCI slots and four ISA slots, and the system board supports Pentium® processor and has the following features:

Processors

•  Pentium® socket-7 Zero Insertion Force (ZIF) connector. You must remove the old processor  to install an upgrade processor.

•  Detachable CPU heat sink with fan.
•  One of the following processors can be installed:
  •  Intel® Pentium® P54C-166MHz internal, 66MHz external
  •  Intel® Pentium® P54C-200MHz internal, 66MHz external
  •  Intel® Pentium® with MMX™ technologie P55C-166MHz internal, 66MHz external
  •  Intel® Pentium® with MMX™ technologie P55C-200MHz internal, 66MHz external
  •  Intel® Pentium® with MMX™ technologie P55C-233MHz internal, 66MHz external
  •  IBM Cyrix 6x86L PR166+ (low power version) processor, 133MHz internal, 66MHz external
  •  IBM Cyrix 6x86MX-PR166 processor, 133MHz internal, 66MHz external
  •  IBM Cyrix 6x86MX-PR200 processor, 150MHz internal, 75MHz external
  •  AMD K6 PR166 processor, 166MHz internal, 66MHz external
  •  AMD K6 PR200 processor, 200MHz internal, 66MHz external
  •  AMD K6 PR233 processor, 233MHz internal, 66MHz external

Memory

•  Onboard fixed 256-KB Pipline Burst Static RAM (PBSRAM).
•  Onboard fixed 2-MB video Synchronize Graphics RAM (SGRAM).
•  Two, 168-pin synchronous dynamic random access memory (SDRAM).
   dual inline memory module (DIMM) sockets.
  •  8-MB, 16-MB, or 32-MB DIMM.
  •  Non-Parity (64-bit) DIMMs.
  •  15 nanosecond (ns) DIMMs.
  •  3.3 volt DIMMs.
  •  Gold contacts.
  •  Maximum system board memory is 64 MB. Refer to 'DIMM Configurations'.

External Ports

•  Video port (15-pin D-sub connector)
•  Parallel port (25-pin D-sub connector)
•  Serial port (9-pin D-sub connector)
•  Game/MIDI port (15-pin D-sub connector)
•  Keyboard port (6-pin PS/2 mini-DIN connector)
•  Mouse port (6-pin PS/2 mini-DIN connector)
•  Two USB ports
•  Microphone-in jack
•  Speaker-out jack
•  Line-in jack

Diskette Drive

•  AT-type
•  3.5-in. 1.44MB slimline diskette drive.

Hard Disk Drive

•  3.5-in. 1-in. height or 5.25-in. 2-in. height IDE AT drive.
•  128 KB 'look-ahead' cache memory in hard disk drive.
•  Average and minimum 10ms seek time, access time varies by the hard disk drive  and the hard disk drive manufacturer.

CD-ROM Drive

•  5.25-in. high-performance, sixteen-speed (16x), or twenty four-speed  (24x) CD-ROM IDE/AT drive.
•  Read data and play audio from standard and mini CD-ROM and audio compact discs (audio CDs).

Multimedia

•  One pair of external speakers with power adapter (some may come with an additional  sub-woofer and power adapter)
•  Standard unidirectional microphone or advanced noise cancelling microphone.

Power Management

•  Compliant to advanced power management (APM) specifications revision 1.2 and  supports display power management signaling (DPMS) monitor.
•  Software shutdown by Windows 95.
•  System may go into suspend by using Windows 95 Start menu or using the power  button or when the suspend time set in the BIOS elapses.
•  Monitor standby when the suspend time set in the BIOS elapses.
•  Support modem ring wake-up from system suspend.

Power Supply

•  The power supply is a 200-W switchable high/low voltage power supply.
•  Thermal sensing variable fan speed
•  One connector for a detachable grounded 3-wire power cord.
•  Four DASD connectors, one mini power connector and three standard power connectors.
•  No power on/off switch on the power supply. All power supplies have a 3-wire auxiliary control  cable that supplies standby power to system board to do Microsoft Windows 95 software and hardware  shutdown feature.

Internal Cabling

•  A pair of 6-pin power input cables from power supply to system board
•  One 3-wire auxiliara standby power connector from power supply to system board.
•  Two 40-pin ribbon cables for hard disk drive and CD-ROM drive.
•  One 34-pin ribbon cable for AT diskette drive.
•  One 4-pin (2-wire) cable for hard disk drive light-emitting diode (LED)
•  One 3-pin (2-wire) cable for power light-emitting diode (LED)
•  One 2-pin (2-wire) cable for power switch.
•  One 4-pin modem voice-in/speaker-out cable
•  One 2-pin modem ring-in wake-up cable

Modem

•  33.6 Kbps or 56 Kbps ISA plug and play (PnP) modem adapter card with  data/fax/voice feature.
•  Telephone line-in (RJ-11) connector.
•  Telephone line-out (RJ-11) connector.

Monitor

•  Super video graphics array (SVGA) monitor.
•  Compliant to VESA power saving mode.
•  Connector for a detachable grounded 3-wire power cord.
•  1.8-m (5.8-ft) attached signal cable.
•  Auto-sensing power input for 100 Vac to 240 Vac.
•  14-in (13.1-in. viewable image size) monitor
  •  0.28-mm dot pitch
  •  Automatic scanning horizontal frequencies from 30KHz to 54KHz
     and all vertical frequencies between 50Hz and 120Hz.
  •  With DDC2A/B feature

•  15-in (13.6-in. viewable image size) monitor
  •  0.28-mm dot pitch
  •  Automatic scanning horizontal frequencies from 30KHz to 54KHz
     and all vertical frequencies between 50Hz and 120Hz.
  •  With DDC2A/B feature

•  15-in (13.7-in. viewable image size) monitor
  •  0.28-mm dot pitch
  •  Automatic scanning horizontal frequencies from 30KHz to 69KHz
     and all vertical frequencies between 50Hz and 120Hz.
  •  With DDC1/2B+ feature
  •  With OSD (on-screen display) menu.

•  17-in (15.7-in. viewable image size) monitor
  •  0.27-mm dot pitch
  •  Automatic scanning horizontal frequencies from 30KHz to 72KHz
     and all vertical frequencies between 50Hz and 120Hz.
  •  With DDC1/2B+ feature
  •  With OSD (intelligent on-screen display) menu.

Keyboard

•  104-key, or 105-key rubber dome keyboard with 1.8-m (5.8-ft) cable.

Mouse

•  PS/2 mouse with 1.8-m (5.8-ft) cable.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.