Memory
+---+
|001| START
+---+
- Power off the system unit.
- Insert the diagnostics diskette into the diskette drive.
- Ensure that all DIMMs are installed correctly.
- Power on the system unit.
- Take note of any messages, error codes, or symptoms.
+---+
|002|
+---+
DO YOU RECEIVE POST MEMORY ERROR MESSAGE?
(YES, read ahead, NO, go to Step 003.)
- Enter BIOS Setup Utility then reboot the system. Take note of any
messages, error codes, or symptoms. If the error message remains,
go to step 005.
+---+
|003|
+---+
- Follow the screen instructions to run Memory test.
+---+
|004|
+---+
DOES THE MEMORY TEST COMPLETE WITHOUT AN ERROR?
(YES, read ahead, NO, go to Step 005.)
- The system memory is now functioning correctly. If you suspect an
intermittent problem, run the Memory test again.
- End.
+---+
|005|
+---+
- Replace each DIMM, one at a time, with a known working DIMM of the
same size and type.
- If the problem does not appear, it means that the last DIMM replaced
is defective. If all DIMMs on the system board, have been replaced
and the problem remains, replace the system board.
- Go to Step 001.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.