Typically CD/DVD-ROM Front view
EMERGENCY <Option 1> CD-ROM and DVD ROM manual disk eject hint's.
If for any reasons the tray does not eject automatically then:
A straightened (formed) paper clip with a diameter of 1.2mm (typical) can be used as an eject-bar.
EMERGENCY <Option 2> CD-ROM and DVD ROM manual disk eject hint's.
Locate the bottom edge of the disk tray. Gently pry the disk tray with a screwdriver.
When the disk tray opens, simply remove the disk from the CD-ROM drive.
IDE - CD/DVD-ROM and ZIP-100 Drive Jumper setting
See > IDE 6x/32x Internal - DVD-ROM Device Driver - Problem solving
CD-ROM, PD/CD-ROM Type
2x CD-ROM FRU P/N 06H5906
6x CD-ROM
Please see the LEGAL - Trademark notice.
No.
Function
1
Power Supply connector
2
Interface connector
3
Device configuration jumper
4
Audio line out connector
5
Digital audio output
6
Testing jumper is reserved for
manufacturer internal testing
purposes.
CD-ROM Drive Jumper Settings
CS
SL
MA
Description
-
-
On
Drive configured as a Master
-
On
-
Drive configured as a Slave
On
-
-
Cable select
CD-ROM, PD/CD-ROM Drive Jumper Settings
See > IDE 6x/32x Internal - DVD-ROM Device Driver - Problem solving
CD-ROM and PD/CD-ROM drives use jumpers or tabs to set the drives as primary (master) or secondary
(slave). Refer to the drive connector labels or the figures below for the drive settings.
-----------------------------------------------
4x CD-ROM FRU P/N 06H7654
-----------------------------------------------
8x CD-ROM
6x PD/CD-ROM
16x Max CD-ROM
24x Max CD-ROM
32x Max CD-ROM
40x Max CD-ROM
48x Max CD-ROM
-----------------------------------------------
Aptiva 2134, 2140, 2142, 2176 CD/DVD-ROM Drive Jumper Settings
See > IDE 6x/32x Internal - DVD-ROM Device Driver - Problem solving
NOTE: For 214x models that have a factory-installed ZIP drive, the ZIP drive
is jumpered as slave and the CD/DVD-ROM drive is jumpered as master.
Aptiva 2158, 2163 DVD-ROM Drive Jumper Settings
See > IDE 6x/32x Internal - DVD-ROM Device Driver - Problem solving
Aptiva 2174, 2187, 2190 CD/DVD-ROM Drive Jumper Settings
Aptiva 2134, 2176 - Factory installed ZIP 100 ATAPI-Drive Jumper Settings
See > ZIP-100 / ZIP-250 for Aptiva 2170, 2171
NOTE: The factory-installed ZIP 100 ATAPI drive is connected to the
system board secondary drive connector. The ZIP drive is a direct access storage device
that features removable media having a formatted capacity of 100 MB.
The ZIP Drive jumper is set as the master drive.
Aptiva 2142 - Factory installed ZIP 100 ATAPI-Drive Jumper Settings
See > ZIP-100 / ZIP-250 for Aptiva 2170, 2171
NOTE: The factory-installed ZIP 100 ATAPI drive is connected to the
system board secondary drive connector. The ZIP drive is a direct access storage device
that features removable media having a formatted capacity of 100 MB.
The ZIP Drive jumper is set as the slave drive.
Back to
Feel free - send a for any BUG on this page found - Thank you.