Starting the System Configuration Utility Program (8650)

1.  Insert the backup copy of the  System Configuration Utility program diskette into the diskette drive.

   At the DOS prompt for drive A,  type SCU and press Enter.

   The system begins the power-on self test.  If the user password is set, the system prompts  you to enter it.

   NOTE:   If a user password is set,  you must  enter it to access  the System Configuration Utility program. If a user and administrator passwords are set, you can enter  either one.

    If a configuration error occurs, a prompt appears before the  operating system starts (see 'Configuration Conflicts').

2.  Press Enter when the SCU title screen appears.
3.  Follow the instructions on the Main Menu  screen to view or change  the configuration. Refer to 'Utilities' for information  on the SCU utilities accessible from this screen.

•  Step 1: About System Configuration
•  Step 2: Add and Remove Boards
•  Step 3: Change Configuration Settings
•  Step 4: Save Configuration
•  Step 5: Switch/Jumper Settings
•  Step 6: Exit
•  Recording the SCU Program Settings

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.