Ethernet Adapter Configuration (100/10 PCI)

Ethernet Adapter Configuration (100/10 PCI)

The PC Server 704 - Type 8650 comes with an Ethernet adapter preinstalled as a standard feature. The adapter contains three LEDs visible from the back of the server that show the status of the connection, monitor read and write activity, and indicate a 100 Mbps connection. Refer to 'Ethernet Adapter Troubleshooting (100/10 PCI)' for more information.

During POST, the server automatically configures the Ethernet adapter.

The Ethernet Configuration and Drivers program comes with the system. The program automatically installs necessary Novell Netware 3.x drivers, tests the adapter, and displays a help file with installation instructions for unsupported network operating-system drivers.

NOTE: You must use Category 5 cabling when operating the Ethernet adapter at 100 Mbps.

The Ethernet Configuration and Drivers program supports the following operating systems:

OS/2 LAN Server
DOS
Windows 3.1
Windows NT Server 3.51

Use the Ethernet Configuration and Drivers program each time you install an adapter. You can also use the program to isolate problems during troubleshooting.

Back to

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.