For non-disk-array models, see 'SCSISelect Utility Program' and the
SCSI Product Guide for information on using the SCSI-2 utility
programs to configure the SCSI devices that are attached to the
SCSI controller on the system board.
For disk-array models, refer to the Mylex booklets for
information on using the programs that are provided on the
RAID Adapter Option Diskette.
NOTE:
The PCI RAID controller (FRU P/N 75H9011) is shipped with the backup
battery jumper set to disable. The jumper must be set to enabled before
configuring the system. Refer to the Mylex booklets that were shipped with
the system.
Configuration switches and jumpers reside on the system board.
The switches define some configuration settings. See 'System Board '.
Use the Ethernet Configuration and Drivers program to configure and test the PC Server 100/10 PCI Ethernet Adapter. The
program automatically installs device drivers, tests the adapter,
and displays a help file with installation instructions for network
operating system drivers.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.