Restoring the Disk-Array Configuration



Restoring the Disk-Array Configuration

To restore the disk-array configuration information in the RAID adapter EEPROM module, use the SCSI-2 Fast/Wide PCI-Bus Adapter Configuration Option Diskette and an up-to-date Disk Array Configuration Backup diskette.

NOTE: Because dynamic changes in the configuration of the disk array occur due to hot-spare drive replacement or other drive maintenance activity, the configuration backup information on the diskette might be different from that in the adapter. It is important that you back up the disk-array configuration information frequently, to keep the backup information on the diskette current.

To restore the RAID configuration information:
  1.  Start the RAID configuration program by  inserting the IBM SCSI-2 Fast/Wide PCI-Bus Adapter Configuration Option Diskette into the  primary diskette drive  and powering-on the system.  If the system already  is powered-on,  press Ctrl+Alt+Del.

     Select Start RAID Configuration Program  from the PC DOS start-up menu and  press Enter.

  2.  Select Advanced functions from the Main Menu.
  3.  Select Restore config. from diskette.
  4.  Follow the instructions on the screen.

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.