PC Server 300 (Type 8640) Pentium® Board
1 Memory Connectors (J7, J8, J9, J10, J33 and J34)
2 IDE Hard Disk Drive LED Connector (W10)
SCSI Hard Disk Drive Adaptor Connector
3 Power LED Connector (W9)
4 Speaker Connector (J11)
5 Processor Socket
6 EISA Slots (J23, J24, J25, J26 and J27)
7 PCI Slots (J30, J31 and J32)
8 Mouse Port (J15)
9 Keyboard Port (J14)
10 Serial Port COM1 (J20)
11 Power Supply Connector P1 (J12)
12 Power Supply Connector P2 (J17)
13 Serial Port COM2 (J21)
14 Parallel Port (J18)
15 Real Time Clock socket
16 Diskette Drive Connector (J19)
17 Power Supply Connector P3 (J37)
18 IDE 2 Hard Disk Drive Connector (J22)
SCSI Hard Disk Drive Adapter Connector
System Board Jumper Settings
Parity Check
Jumper |
Configuration |
Setting |
J1 |
Pentium® parity check enabled (default) Pentium® parity check disabled |
Installed Not installed |
DRQ Selection
Jumper |
Configuration |
Setting |
W14 |
DRQ6 DRQ7 |
Pins 1-2 Pins 2-3 |
Secondary Cache Selection
Jumper |
Configuration |
Setting |
J40 |
5 volts for the Pentium® 5.3 volts for the Pentium® |
Installed : Jumper blocks (all pins) Installed : Power module |
J41 |
5.3 volts for ground |
Installed : Power module (ground) |
J42 |
5.3 volts for ground |
Installed : Power module (ground) |
Selected Jumper Default Setting
Jumper |
Default Setting |
J3 |
Pins 2-3 |
J4 |
Pins 1-2 |
J35 |
Pins 1-2 |
Cache Selection
Jumper |
Configuration |
Setting |
J2 |
Pentium® write-through cache Pentium® write-back cache (default) |
Installed Not installed |
DACK Selection
Jumper |
Configuration |
Setting |
W16 |
DACK 6 DACK 7 |
Pins 1-2 Pins 2-3 |
Keyboard Selection
Jumper |
Configuration |
Setting |
W6 |
PS/2 Mouse installed (default) PS/2 Mouse not installed |
Installed Not installed |
Clock Selection
Jumper |
Configuration |
Setting |
J5 |
PS/2 Mouse installed (default) PS/2 Mouse not installed |
Installed Not installed |
Pentium® Clock Selection
Jumper |
Configuration |
Setting |
J6 |
Oscillator for U15 (default) Clock synthesizer |
Pins 1-2 Pins 2-3 |
BIOS Mode Selection
Jumper |
Configuration |
Setting |
W2 |
Bios in boot recovery mode |
Pins 1-2 |
W2 |
Bios in normal mode (default) |
Pins 2-3 |
Secondary Cache Selection
Configuration |
J3 |
J4 |
J35 |
No secondary cache |
Pins 1-2 |
Pins 1-2 |
--- |
Reserved |
Pins 1-2 |
Pins 2-3 |
--- |
256KB secondary cache |
Pins 2-3 |
Pins 1-2 |
Pins 1-2 |
512KB secondary cache |
Pins 2-3 |
Pins 2-3 |
Pins 2-3 |
Jumper W17 IRQ Selection
Selection |
Setting |
Redirect modified PCI interrupt to IRQ 5 Redirect modified PCI interrupt to IRQ 9 Redirect modified PCI interrupt to IRQ 10 Redirect modified PCI interrupt to IRQ 11 Redirect modified PCI interrupt to IRQ 15 Redirect modified PCI interrupt to IRQ 14 |
Pins 1-2 Pins 3-4 Pins 5-6 Pins 7-8 Pins 9-10 Pins 11-12 |
Reserved Jumpers
Jumper |
Setting |
W20 |
Pins 2-3 |
J5 |
Installed |
J6 |
Pins 1-2 |
Back to
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.