Termination (AHA-2940/2940W Adapters)

Termination (AHA-2940/2940W Adapters)

Use the following information to determine the termination required for the adapter, then, run the SCSISelect Utility Configuration program if required. (To run the SCSISelect Configuration Utility program, see 'SCSISelect Configuration Utility' and 'Starting the SCSISelect Configuration Utility'

AHA-2940 Adapter

Adapter Termination Devices Connected To ---------------------------------------------------------------- Enabled Internal connector only ---------------------------------------------------------------- Enabled External connector only ---------------------------------------------------------------- Disabled Internal and external connectors

AHA-2940W Adapter

Adapter Termination Devices Connected To ---------------------------------------------------------------- Low On / High On 68-pin internal connector only ---------------------------------------------------------------- Low On / High On 68-pin external connector only ---------------------------------------------------------------- Low On / High On 50-pin internal connector only ---------------------------------------------------------------- Low Off / High Off 68-pin internal and 68-pin external connectors ---------------------------------------------------------------- Low Off / High On 50-pin and 68-pin internal connectors ---------------------------------------------------------------- Low Off / High On 50-pin internal and 68-pin external connectors ---------------------------------------------------------------- INVALID 50-pin and 68-pin internal connectors, and 68-pin external connector

Back to

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.