Diagnostics and Test Information (Models EZO, EZV, EZL, EZS, EZE)

•  Diagnostic Files
•  Installing Additional Test Programs
•  USERDIAG.CFG Example

•  The QAPlus/PRO diagnostic program recognizes the primary processor as  LUN 1 and the secondary processor as LUN 2. During testing the program  automatically tests LUN 1. You must select LUN 2 if you want the program  to test the secondary processor.
•  The type of DASD diagnostics required to test the hard disk controller  (adapter) and drives is determined by the type of hard disk adapter  installed in the computer.
•  Always start with General Checkout (QAPlus/PRO)

Problem	Reference
DASD, CD-ROM or SCSI Problems	For non-disk-array models, see 'SCSISelect Utility Program' For array models, see 'Disk Array Configuration'
Error Codes/Error Messages 'Symptom-to-FRU Index Supplement'	Symptom-to-FRU Index (QAPlus/PRO)
Power Supply Voltages	See 'Power Supplies (Type 8641)'
Miscellaneous	General Checkout (QAPlus/PRO)

The Diagnostic program supplied with the server is the primary method of testing the server. Option-specific diagnostic files are supplied with some optional devices and adapters. These files provide a more specialized test of the option. 'Installing Additional Test Programs' provides additional information about installing and using diagnostic files. Also, refer to the documentation supplied with the option for information on installing and running option-specific diagnostics.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.