How To Run the Diagnostics (3546)
How To Run the Diagnostics
Do the following to run the diagnostic tests.
Either the TrackPoint II or the
cursor move keys can be used to interact
with the tests.
The Enter key works the same as selecting the OK icon to reply OK.
Press and hold F1, then turn on the computer.
Hold F1 until the Easy-Setup screen appears.
- Select Test and press Enter.
The basic diagnostic screen appears.
- Select a device and press Enter to run the test.
- The test progress screen appears.
- OK appears when the test ends without any errors.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.