1040 LED Assembly (3545)



1040 LED Assembly


NOTE: When you install the LED assembly in the Dock I:
  1.  Put the edge of the LED assembly  into the groove.
  2.  Put the status indicators and  headphone jack into the each hole.
  3.  Hook the 4 to the guide.
  4.  Reinstall the two screws.


1050 Buzzer

 

Step Color and type (quantity) Length
1 White self tapping for plastics (2) Diameter: 2 mm (0.08 in.) 8 mm (0.31 in.)
6 White screw (1) 5 mm (0.20 in.)


NOTE: Make sure you use the correct screw.


Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.