+---+
|001|
+---+
- Always start with 'General Checkout'
- Power-off (O) the computer and wait 10 seconds.
- Reseat the DRAM card.
- Run the advanced diagnostics; if necessary refer to
'Loading the Diagnostics'
- Make a note of any error code you receive.
DID YOU RECEIVE A 20X XXXXXXXX XXXXXXXX OR
02XX POST ERROR OR FAILURE SYMPTOM ?
+---+
Yes No-+002| Go to Step 006.
+-+-+ +---+
|003|
+---+
IS A DRAM CARD INSTALLED ?
+---+
Yes No-+004| Replace the system board.
| +---+ Press Ctrl+Alt+F3 to set the time and
| date to remove the 16X errors.
+-+-+
|005|
+---+
Replace the DRAM card.
If the error remains, replace the system board. Press Ctrl+Alt+F3
after POST to set the time and date and remove the 16X errors.
------------------------------------------------------------------------
+---+
|006|
+---+
- If you need to bypass an error, press Esc or F1.
- If you cannot continue, you might have a keyboard problem;
go to 'Symptom-to-FRU Index'
DID THE ADVANCED DIAGNOSTICS MENU APPEAR ?
+---+
Yes No-+007| You might have a diskette drive problem;
+-+-+ +---+ go to 'Symptom-to-FRU Index'
|008|
+---+
- Press 0 (SYSTEM CHECKOUT), then press Enter.
- Follow the screen instructions.
NOTE: Ignore a 199 error.
- Press 0 (RUN TESTS ONE TIME),
then press Enter.
- Press 2 (MEMORY), then press Enter.
DID YOU RECEIVE A 2XX ERROR OR FAILURE SYMPTOM ?
+---+
Yes No-+009| Go to Step 011
| +---+
|
+-+-+
|010|
+---+
Go to Step 003
------------------------------------------------------------------------
+---+
|011|
+---+
DID THE SYSTEM CHECKOUT MENU APPEAR AT THE END OF TEST ?
+---+
Yes No-+012| You might have a power source problem;
+-+-+ +---+ go to 'Power Systems Checkout'.
|013|
+---+
The advanced diagnostics tests finished without detecting
a failure.
If you suspect an intermittent problem, start an error log.
If you need instructions, refer to 'Error Log'.
------------------------------------------------------------------------
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.