General Checkout (2615)

General Checkout

  The diagnostic tests are intended to test only  IBM products. Non-IBM products, prototype card, or modified options can give false errors and invalid computer responses.
  1.  Power-off the computer and all external devices.
  2.  Insert the Advanced Diagnostics diskette into the diskette drive.
  3.  Power-on all external devices, then power-on the computer.
  4.  Press Ctrl+Alt+Ins to start the Monitor program.
  5.  At the Monitor-program prompt, type BF then press Enter.
  6.  Follow the instructions on the screen and run the diagnostics  tests. For information on how to disable a password,  see 'Power-on Password'

    NOTE: Press F1 to access the help screens.

  7.  If you receive an error or message, find your symptom below, then go  to the appropriate page.

Symptom Go to ...
Numeric Error Code 'Symptom-to-FRU Index'
Error Messages 'Miscellaneous Symptoms'

  For information about how to run diagnostics, passwords, and various other tests, go to 'Related Service Procedures'.

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.