General Checkout (8554)



General Checkout

 +---+
 |001|
 +---+
 DOES THE PROBLEM APPEAR TO BE A POWER SUPPLY FAILURE?
           +---+
  Yes   No-+002| Go to Step 006
 +-+-+     +---+
 |003|
 +---+
 DO ALL SYSTEM-STATUS INDICATORS REMAIN OFF?
           +---+
  Yes   No-+004| Go to Step 006
 +-+-+     +---+
 |005|
 +---+
 - Make sure the power control switch at the rear of the computer
   is set to ON.
 - Go to 'Power Systems Checkout'
 -----------------------------------------------------------------------
 +---+
 |006|
 +---+
 - Power-off the computer and all external devices.
 - Check all cables and power cords.
 - Make sure no diskette is in the drive.
 - Power-on all external devices.
 - Power-on the computer and check for the following responses:
   1. All system-status indicators appear once for about 1 second.
      NOTE:
      Some indicators remain on and others go off after 1 second.
   2. Memory test (the number increases.)
   3. Audible responses:
      One short beep
          - or -
      Two short beeps.
 DID YOU RECEIVE THE RESPONSES LISTED ABOVE ?
           +---+
  Yes   No-+007| Go to Step 013
 +-+-+     +---+
 |008|
 +---+
 - Press Ctrl+Alt+Del.  When the cursor moves to the
   upper right, press Ctrl+Alt+Ins to start the system
   program.
   If the IBM logo screen does not appear, insert the backup
   Reference Diskette into the diskette drive and repeat this step.
   1. If you are not at the Main Menu, follow the instructions on the
      screen to advance to the Main Menu.
 If you cannot advance to the Main Menu, go to 'Symptom-to-FRU Index'
        - or -
 If that does not correct the problem, go to 'Undetermined Problem'
      NOTE:
      a. If the computer has an incorrect keyboard or numeric keypad response,
         go to 'Ext. Keyboard/Aux. Input Device Checkout'
      b. If the printer has incorrect responses, go to 'Printer Checkout'
      c. If the external CRT display has problems such as jittering,
         rolling, shifting, or being out-of-focus,
         then go to 'External Display Self-Test'
   2. Press Ctrl+A and run the system checkout.
 IS THE LIST OF INSTALLED DEVICES CORRECT ?
           +---+
  Yes   No-+009| Go to 'Checking Installed Devices'
 +-+-+     +---+
 |010|
 +---+
 - Run the diagnostic tests.
 DID THE TEST IDENTIFY A FAILURE ?
      NOTE:
      If the test stops and you cannot continue,
      replace the last device tested.
       - or -
 If any POST error code appears, go to 'Symptom-to-FRU Index'
           +---+
  Yes   No-+011| You might have an intermittent problem:
   |       +---+
   |             ° Check for damaged cables and connectors.
   |             ° Reseat all adapters, drives, and modules.
   |             ° Start an error log and run the tests multiple times.
   |             ° Check the power supply in use when the error is
   |               reported (see 'Power Systems Checkout').
   |             ° Check 'Symptom-to-FRU Index' If this did not fix
 +-+-+             the problem, go to 'Undetermined Problem'
 |012|
 +---+
 Go to 'Symptom-to-FRU Index'
 -----------------------------------------------------------------------
 +---+
 |013|
 +---+
 DID NOTHING APPEAR ON THE SCREEN ?
           +---+
  Yes   No-+014|
   |       +---+
   |             ° If all system-status indicators do not appear
   |               for about 1 second, go to Step 016 under
   |               'Power Systems Checkout'
   |             ° If the memory count is incorrect,
   |               go to 'Memory Checkout'
   |             ° Go to 'Symptom-to-FRU Index'
   |               If that does not correct the problem,
 +-+-+             go to 'Undetermined Problem'
 |015|
 +---+
 Go to 'Symptom-to-FRU Index'
     - or -
 If that does not correct the problem, go to 'Undetermined Problem'


Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.