Do not attempt to open covers of the power supply. Power supplies are not
serviceable and are to be replaced as as unit.
6050 and 6070 Power Supplies
The power supplies for the Power Series machine types 6050 and 6070 apply 5 V dc power to the
system board when the power cord is plugged into a good power source. The figures below show the voltages
for the Auxillary 5 V dc Power Supply connector for these computers. Check the voltages for this connector
first with the power turned off.
NOTE: The power cord should be plugged into a good power source and the power on LED on the front of
the computer should be off. The voltages must be checked with the power supply cables connected to the system board, and
the drive connector connected to the drive.
System Power Off
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.