Netfinity 10/100 Fault Tolerant Adapter - Device Drivers and Diag. Diskette V-1.01
IBM Netfinity 5500 Version 1.1 Ethernet Device Driver
Installation README File
This README file contains the latest information about installing the ethernet device drivers for the IBM Netfinity 5500.
In most cases, the ethernet controller can determine the line speed correctly even if the attached hub or switch does not support auto negotiation. If you are having problems use the device driver overrides to manually configure the ethernet controller mode to match the hub or switch mode. As with any adapter, if the hub or switch is configured for full duplex and does not support auto negotiation, then you must use the device driver manual overrides for proper operation.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.