Automatic Document Feed (ADF) Color Scanner

(ADF Color Scanner User's Guide P/N 41H9709)

Automatic Document Feed (ADF) Color Scanner

FRU P/N

25H6648 ADF Color Scanner
25H6641 ADF Adapter Card (ISA)
41H9717 Interface Cable

OPTION P/N 25H6629 OADFCSM includes the following

IBM ADF Color Scanner
Scanner adapter (ISA)
Twenty-five pin interface cable
IBM ADF Color Scanner 3.5-inch Setup Diskette
Recognita Plus 3.5-inch Setup Diskette
Warranty Registration Card
Test photograph

Product Description

The scanner is a compact desktop unit that loads from the rear. One expansion slot is required for the scanner adapter.
The following is a summary of the scanner features:

Contains a Contact Image Sensor for quality images and long-lasting operation.
Pulls tha paper through the scanner like a fax machine
Reproduces documents in their true colors
Reproduces high quality half-tone art
Reproduces line art accurately
Operates with Hewlett-Packard software
Conforms to the TWAIN standard for scanners
Scans pages up to 21.6 cm (8.5-inch) wide without producing fuzzy edges
Scans multipage documents

Hardware and Software Requirements

To use the scanner, you need the following minimum hardware and software:

One of the following computers with an 80386 microprocessors, Industry Standard (ISA) internal addressing, and 1 empty 8 or 16-bit expansions slot.
- IBM PC Series 300 or 700
- IBM PS/ValuePoint
- IBM PS/1
- IBM Aptiva
- IBM compatible computer
A mouse or an equivalent input device
4MB of random access memory
A hard disk drive with 10MB of free disk space
Microsoft Windows V-3.1
DOS V-3.1

ISA Adapter I/O Address

For most computers, the factory installed I/O address 270=/H3, is the correct choice.

Adapter Jumper setting

° ° ° ° ° ° ° ° ° °--° ° ° ° ° | | | | ° ° ° ° ° ° ° ° ° °--° ° ° ° ° 370=/H7 270=/H3 330=/H5 230=/H1 360=/H6 ° ° ° ° °--° | | | ° ° ° ° °--° 260=/H2 320=/H4

Color Scanner Software Installation

Insert the Setup Diskette in drive A
Go to the Windows Program Manager screen and select RUN from the File pull-down menu.
To start the setup program, type:
A:\SETUP.EXE then press ENTER
Select Continue and the Scanner Setup screen displays. the Scanner Setup WELCOME screen.
Follow the directions on the Scanner Setup screens to install the software.
The scanner setup program pauses and displays the line:
C:\SCANNER\ You can accept this drive and directory for the scanner programs or you can type your own.
The setup program also pauses, informs you that the Recognita Plus program for Windows will load, and asks you to insert the Recognita Plus Setup Diskette.
Recognita Plus is the OCR package that is included with your scanner.
Insert the Recognita Plus Setup Diskette and select Continue.
When you see the installation completion message, close Windows and restart your computer to access the scanner software.

Changing the I/O Address

Change the Adapter Jumpers (see above Jumper table)
In the CONFIG.SYS file change the line
DEVICE=C:\SCANNER\ADFCOLOR.SYS /Hx to the correct
new value. (see above Jumper table)
e.g. If you select I/O address hex 260=/H2 then the line should look like:
DEVICE=C:\SCANNER\ADFCOLOR.SYS /H2
Shut down, and restart the computer.

Back to

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.