ITBU - Description
The IBM PS/2 Internal Tape Backup Unit is an internally mounted product that
performs fixed disk backup and restore for the following IBM PS/2 products.
8525, 8530, 8550, 8555, 8560, 8565, 8570, 8580, 9556, 9557, 9576, 9577
The unit allows the user to transfer up to 80MB or 120MB of data from a fixed
disk to a removable tape cartridge. The tape drive slides into the Diskette Drive B slot in the PS/2.
The IBM PS/2 ITBU uses a 3.5 Inch mini tape cartridge for operation. The following cartridges are
supported:
The Option consists of the following
The tape unit requires the IBM PS/2 ITBU Backup program for operation.
This program is not provided with this option. (PCTOOLS V-7.x and other Utilities)
Installing the Tape Unit
Cleaning the Tape Unit Read/Write Head
Please see the LEGAL - Trademark notice.
Part
FRU P/N
Tape Unit
87F9787 OPT.-P/N 30F5279
Adapter Cable (Berg 34-Pin)
34F2717
Adapter Cable Pin-Layout
Blank (formatted) Tape
30F5277
ANSI Standard X335/87-218 "Unrecorded Magnetic Tape Mini-cartridge"
for Information Exchange.)
Install the Tape Unit in an empty Slot or Tray. Connect the B-diskette drive cable to
the ITBU connector. Install the model-required tape cover plate.
On the backup copy of the Reference Diskette, install the Diagnose and @ADF-file
with the COPY an OPTION diskette function.
It is recommended that periodically the ITBU read/write head should be cleaned.
The head must be cleaned if there are read or write / format errors or a large
number of bad blocks. This should be done by using a cleaner cartridge.
Back to
Feel free - send a for any BUG on this page found - Thank you.