6598 PC 360-S150 System Board
1 Processor Connector
2 Power Supply Connector (J19)
Power Supply
3 Front Panel I/O Connector
4 Diskette Drive Connector
5 Hard Disk Drive Connector
6 CD-ROM Drive Connector
7 Configuration Jumpers (J25)
8 ISA Adapter Slots
9 PCI Adapter Slots
10 PCI/ISA Adapter Slots
11 Backup Battery
12 Bank 0 - SIMM-Memory Connectors
13 Serial Port 2
14 Bank 1 - SIMM-Memory Connectors
15 Parallel Port
16 Mouse Port
17 Keyboard Port
18 Serial Port 1
PC 360-S150 Jumper Settings (D) = default
Please see the LEGAL - Trademark notice.
Jumper
Setting
Description
Bus Speed
Clock Ratio
PCI/ISA1-2 DWN
4-5 DWN
7-8 DWN
11-12 UP150MHz Processor
Bus = 60.14 MHz
Clock ratio = 5/2
PCI = 30 MHz
ISA = 7.51MHz
Bus Speed
Clock Ratio
PCI/ISA2-3 UP
5-6 UP
7-8 DWN
11-12 UP166MHz Processor
Bus = 60.14 MHz
Clock ratio = 5/2
PCI =
ISA =
Bus Speed
Clock Ratio
PCI/ISA2-3 UP
5-6 UP
8-9 UP
10-11 DWN200MHz Processor
Bus = 66.48 MHz
Clock ratio = 5/2
PCI = 33 MHz
ISA = 8.31MHz
Password see Note
14-15 (D)
13-14Password Enabled
Password Reset
CMOS see Note
17-18 (D)
16-17CMOS Normal
CMOS Reset
Setup Utility
20-21 (D)
19-20Setup Enabled
Setup Disabled
Flash Recovery
23-24 (D)
22-23Normal
Flash Recovery Enabled
Reserved
26-27 (D)
(Do Not Change)
Note - Instruction for Password-Reset / CMOS-Reset
System Board Memory Configurations
These are the recommended combinations of memory-module kits. Each bank must contain a matched
pair of SIMMs having the same size and speed .
If all four memory slots are populated -> all memory SIMMS must be the same size and speed.
See also Memory Matrix.
Total Memory
Bank 1
Bank 0
16MB
8MB
---
32MB
8MB
8MB
32MB
16MB
---
64MB
16MB
16MB
64MB
32MB
---
128MB
32MB
32MB
Back to
Feel free - send a for any BUG on this page found - Thank you.