PC-300/350 Pentium® 75/90/100MHz (65x6) System Board Locations

65x6 (PC 300) System Board


1 Video Display Connector
2 Parallel Port Connector
3 Serial Port Connector
4 BIOS Flash Jumper (J5J1)

5 Serial Port Connector
6 Mouse Port Connector
7 Keyboard Connector
8 PCI/ISA Riser Connector
730/750 Series RISER Cards

9 Primary (outer) IDE Connectors
9 Secondary (inner) IDE Connectors

10 Power Connector
Power Connector (Voltages)

11 Diskette Drive Connector (J9D1)
12 Processor VRE Enable (J9C1)
13 Memory Module Connectors
14 FAN - Connector
15 RTC Battery
16 512KB Cache Memory Connectors
17 Processor Connector
18 Hard Disk / Power LED
18a Front Panel I/O Connector (J2A2)
(Connectors are not used)
- SPKR
- FAN
- IR
- SL

19 Cache Tag Memory Connector
20 Front Panel I/O Connector (J1D1)
(Connectors are not used)
- RST
- PWR
- LOCK
- HDD
- TURBO

21 Configuration Switch Block (SW1)
- L2 Cache
- CMOS settings
- Power on password
- Processor type

22 Video Feature Connector
VESA Connector

23 2MB Video Memory Connectors

L2 Cache Size - SW1 Switch 1,2

L2 Cache Size Switch 1 Switch 2
0KB On n/a
256KB Off Off
512KB Off On


CMOS Setup Utility - SW1 Switch 3, 4, 5

Description Switch 3 Switch 4 Switch 5
Power-On Password Enabled Off (D) Off Off
Power-On Password Reset On (D) Off Off
Normal CMOS Settings Off Off (D) Off
Reset CMOS Settings Off On Off


Processor Type - SW1 Switch 6, 7, 8

Processor Switch 6 Switch 7 Switch 8
50/75 MHz Off Off Off
60/90 MHz Off On Off
66/100 MHz Off Off On


BIOS Flash Reset (J5J1)

Jumper Position Description
J5J1 1-3 Normal (D)
J5J1 1-2 Reset


ISA Bus Clock Speed Jumper (J5J1)

CPU External Clock Speed ISA 1/6 Clock
Speed
Jumper 5-7 Not
Installed
ISA 1/8 Clock
Speed
Jumper 5-7
Installed
50/75 MHz 8.33 MHz (D) 6.25 MHz
60/90 MHz 10 MHz 7.5 MHz (D)
66/100 MHz 11 MHz 8.25 MHz


Note J5J1's PINs 4, 6 and 8 are reserved
and should not be jumpered.

Processor VRE Enable (J9C1)

Jumper Description
J9C1 1-3 (D) Standard Voltage Processor
J9C1 5-7 VRE Rated Processor


The following table shows the recommended combinations of memory-module kits. Each bank must contain a matched pair of SIMMs having the same size and speed.

Total
Memory
Bank 0 Bank 1
8 MB 4 MB -
16 MB 4 MB 4 MB
16 MB 8 MB -
24 MB 4 MB 8 MB
24 MB 8 MB 4 MB
32 MB 8 MB 8 MB
32 MB 16 MB -
40 MB 4 MB 16 MB
40 MB 16 MB 4 MB
64 MB 32 MB -
72 MB 4 MB 32 MB
72 MB 32 MB 4 MB
80 MB 8 MB 32 MB
80 MB 32 MB 8 MB
128 MB 32 MB 32 MB


Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.