2144 SL-D (Pentium) Aptiva System Board Locations



2144 SL-D Aptiva System Board (Pentium)

1 J15 Modem ring detect Jumper
Wake Up on Ring Connector

2 J29 Diskette Drive write protect Jumper
3 J34 Diskette Drive Connector

4 J12 / J13 Hard Disk Drive Connectors
(J12 = Drive 0,1 / J13 = Drives 2, 3)
The CD-ROM drive MUST be Connected to J13

5 J38 On/off switch Power Supply Connector
6 J37 On/off switch Connector
7 J33 Power Supply Connector
Power Connector/Voltage

8 U900 Processor Connector
9 J36 Processor Fan Connector
10 J14 LED Connector POWER
(1, 2 for Hard Disk Drive 3, 4)

11 J20 Beeper Jumper (Enabled 1-2 / Disabled 2-3)
(Enabled 1-2 / Disabled 2-3)

12 SP1 Beeper
13 J6 / J7 Memory Connectors (Bank 2)
14 J8 / J9 Memory Connectors (Bank 1)

15 U21 / U23 Video DRAM modules
16 J40 Power On Password Jumper
17 J25 Video Feature Connector (VESA)
18 BAT Battery
19 J17 Display Connector
20 J18 Parallel Connector
21 J2 Serial Connector
22 J3 Serial Connector
23 J10 Keyboard Connector
24 J11 Mouse Connector
25 J39 Mouse Connector

NOTE: This board type is Factory populated with non-parity Gold contact type SIMMs.
Memory SIMMs can be 2, 4, 8, 16 or 32 Megabyte Gold contact types and MUST be used as (Bank) pairs. (e.g. J8-J9 = Bank 1 / J6-J7 = Bank 2 can be populated with SIMM pairs of different size) The system support J6-J7 each 2MB = total 4MB, up to J6-J9 each 32MB = total 128MB.

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.