2161, 2162 Aptiva SL-A System Board
J1 Fan +12 Vdc connector
J2 USB (Universal Serial Bus)
J3 System board VRM - Voltage Regulator connector
J4 Cache Connector
J5 Primary Hard Disk IDE (Hard Disk 1, Hard Disk 2)
J6 Secondary Hard Disk IDE (Hard Disk 3 or CD-ROM,
Hard Disk 4)
J7 Mouse Connector
J8 Keyboard Connector
J9 DIMM 168-pin Socket
J10 DIMM 168-pin Socket
J13 Riser Connector - PCI/ISA
J14 External Speaker power connector
J15 Serial Port A Connector
J16 Parallel Port Connector
J17 Diskette Drive Connector
J19 VESA Video Feature Connector
J21 Monitor Signal Connector
J22 Power Supply 2-pin Connector (On/off switch)
J23 Power Supply 3-pin Connector (Aux 5Vdc)
J24 Wake Up On Ring Connector
J25 HDD/Power-on LED Connector
(HDD = 1-2, Power-on = 3-4)
J26 Media console connector - not used
JP1 External Speaker
(Internal = 1-2, External = 2-4)
JP2 System Board Bus Clock (see table)
JP3 Core/Bus frequeny ratio (see table)
JP4 System Board Flash Jumper
(Normal = 1-2, Write Protect = 2-3)
JP5 Diskette Drive (FDD) write enable
(Enable = 1-2, Disable = 2-3)
JP6 CMOS Power-On Password Reset
(Normal = 1-2, Clear = 2-3)
JP9 Video memory upgrade connector
JP10 Video memory upgrade connector
JP12 Home Director
(Home Director = 1-2
Wakeup On Ring over Serial port only = 2-3)
P1, P2 Power Supply Connector (P1, P2)
P11 3.3 Vdc Power Supply Connector (P11)
U2 Processor
System Bus Clock
Please see the LEGAL - Trademark notice.
Function
Jumper
75 MHz
66.6 MHz
60 HMz
55 HMz
System Bus Clock
JP2
3-5, 2-4
1-3, 2-4
1-3, 4-6
3-5, 4-6
Processor Speed, MHz
P54C or P55C
Processors, MHz JP2
JP3
Type 2162
120MHz 1-3, 4-6
1-3, 4-6
Type 2161
133MHz/66.6MHz 1-3, 2-4
1-3, 4-6
Type 2162
150MHz 1-3, 4-6
1-3, 2-4
Type 2161, 2162
166MHz/66.6MHz 1-3, 2-4
1-3, 2-4
Type 2161, 2162
200MHz/66.6MHz 1-3, 2-4
3-5, 2-4
Type 2162
233MHz 1-3, 2-4
3-5, 4-6
Core Bus Frequency Ratio Settings
Function
Jumper
3:2
2:1
2.5:1
3:1
Core/Bus Frequency Ratio
JP3
3-5, 4-6
1-3, 4-6
1-3, 2-4
3-5, 2-4
Back to
Feel free - send a for any BUG on this page found - Thank you.