< ERROR CODES (Micro Channel) |
+---+
|001|
+---+
Notes:
- Check for the following responses:
DID YOU RECEIVE the CORRECT RESPONSES ?
+---+
Yes No-+002|Find the failure symptom in the
| +---+SYMPTOM-to-FRU Index (MC)
+-+-+
|003|
+---+
ARE ANY EXTERNAL SCSI DEVICES ATTACHED TO the SYSTEM ?
+---+
Yes NO-+004|Go to step 007
| +---+
+-+-+
|005|
+---+
DID the POWER-ON GOOD INDICATOR FOR ALL OFF the EXTERNAL
SCSI DEVICES COME ON ?
+---+
Yes No-+006|Check the voltages.
+-+-+ +---+Go to 'Related Service Information'
|007|
+---+
DID YOU RECEIVE A POST ERROR CODE ?
+---+
Yes No-+008|Note: You might have an intermittent failure.
| +---+ Go to 'System Error Log' to see if any
| errors are logged. If no errors are logged
| or if the error log is not supported, go to
| step 022
+-+-+
|009|
+---+
IS the FIRST POST ERROR CODE 0106XXXX 0166XXXX or 0167XXXX ?
+---+
Yes No-+010|Go to step 012
| +---+
|
There is a network communication problem. Go to
'Symptom-to-FRU Index (MC)' and find the
error code. If you suspect another type of network
problem, or you just want to test the network adapter,
go to 'Network Service Procedures'
+-+-+
|012|
+---+
DOES the SYSTEM HAVE A SCSI ADAPTER OR DEVICE INSTALLED
OR CONNECTED EXTERNALLY ?
+---+
Yes No-+013|Go to step 022
+---+ +---+
|014|
+-+-+
|
+-+-+
|015|
+---+
IS the FIRST POST ERROR CODE WITHIN the RANGE OF
02080000 190I TO 02470000 190I ?
+---+
Yes No-+016|Go to step 022
| +---+
+-+-+
|017|Start the system programs.
+---+
Note: For instructions on starting the system programs.
see 'Starting System Program Diagnostics'
- Verify the 'Enable/Disable' settings are correct. (If you
are not familiar with this settings, see 'SCSI Device
Default Settings').
Note: If you receive a warning on the screen regarding the
'Keep/Remove' settings, follow the instructions on
the screen before continuing.
DID YOU HAVE TO CORRECT ANY OF the ENABLE/DISABLE SETTINGS ?
+---+
Yes No-+018|
| +---+
| Go to 'Symptom-to-FRU Index (MC)'
| Before replacing any SCSI devices, verify there are no
| duplicate SCSI ID settings on the same bus.
+-+-+
|019|Restart the computer (power-off, then on).
+---+
DID the POST ERROR REMAIN ?
+---+
Yes No-+020|
| +---+
| If you suspect another problem, or you want to run
+-+-+ System Checkout, go to step 022.
|021|
+---+
----- go to 'Symptom-to-FRU Index (MC)'
+---+
|022|- Start the system programs.
+---+
Note: For instructions on starting the system programs.
see 'Starting System Program Diagnostics'
- If you are not at the Main Menu, follow the instructions
on the screen to advance to the Main Menu, then press
Ctrl+A and run system checkout.
Go to 'Related Service Information' for:
° 'UNDETERMINED Problems' (computer hangs)
° Incorrect keyboard responses
° Incorrect printer responses
° Incorrect display responses (jittering, rolling,
shifting, changing colors, or out of focus)
Note: If a minimum of 896KB of memory is not active,
the diagnostic tests cannot be loaded.
IS the DEVICES LIST CORRECT ?
+---+
Yes No-+023|
| +---+
| Go to 'Devices List'. If that does not correct the
| problem, go to 'UNDETERMINED Problems'
|
+-+-+
|024|- Run the advanced diagnostic tests.
+---+
DID the TEST IDENTIFY A FAILURE ?
Note: If the test start but do not complete and you
cannot continue, replace the device that was
being tested.
+---+
Yes No-+025|
| +---+
| Note: If you noticed an error symptom or if you
| received any POST error codes when the
| computer was powered-on, go to
| 'Symptom-to-FRU Index (MC)'.
|
| You might have an intermittent problem
|
| ° Check for damaged cables or connectors.
| ° Reseat all adapters, drives, and modules.
| ° Check the system fan.
| ° Go to 'Power Supply Voltage Check' to
| check voltages.
| ° Start an error log and run the tests multiple times.
| ° If you did not find a problem, go to
| 'UNDETERMINED Problems'.
+-+-+
|026|
+---+
Follow the instructions on the screen. If that does not correct
the problem, go to Symptom-to-FRU Index (MC)
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.