Go to 'Memory Problems 80286 to 80486 computers' for models:
PARITY CHECK 1
Indicates that memory on the system
board has failed. If the system has a total of 512KB
memory installed (8525), replace the memory module
packages. If the system has a total of 640KB memory
installed and the address (number displayed below
PARITY CHECK 1) is less than 20000, replace the
optional memory modules (8525), or the system board
(8530). Otherwise, replace the memory module (8525) or
S1 and S2 (8530).
PARITY CHECK 2
Indicates that an adapter memory
module has failed. Go to UNDETERMINED Problems.
+---+
|001|
+---+
Memory errors are displayed as:
AAAAAA BB CCCC 20X
To isolate a memory failure, answer the following questions.
DID YOU RECEIVE A '205 Memory ERROR' MESSAGE
DURING POST OR WHEN RUNNING the Memory TESTS ?
+---+
Yes No-+002|Go to step 011
+-+-+ +---+
|003|
+---+
IS the SYSTEM A TYPE 8530 ?
+---+
Yes No-+004|Go to step 006
+-+-+ +---+
|005|
+---+
Replace the system board.
+---+
|006|
+---+
IS CCCC FOUR ZEROS (0000) ?
+---+
Yes No-+007|For an C in CCCC that is not zero, replace
| +---+the corresponding modules as shown:
|
| C C C C
+-+-+ U35 U34 U22 U16
|008|
+---+
WAS the SIXTH DIGIT IN AAAAAA 1,3,5,7,9,B,D or F ?
+---+
Yes No-+009|Replace memory module ZM1.
| +---+
+-+-+
|010|Replace memory module ZM1.
+---+
+---+
|011|
+---+
IS BB AN 01 ?
+---+
Yes No-+012|IS CCCC FOUR ZEROS ?
| +---+
| IS CCCC FOUR ZEROS ?
| +---+
| Yes No-+013|
| | +---+
| | ARE the LAST TWO Cs IN CCCC ZEROS (00) ?
| | +---+
| | Yes No-+014|Replace Memory Module Package 1
| | | +---+(8525) or S2 (8530)
| | +-+-+
| | |015|Replace Memory Module Package 2 (8525)
| | +---+or S1 (8530)
| +-+-+
| |016|
| +---+
| WAS the SIXTH DIGIT IN AAAAAA 1,3,5,7,9,B,C,D or F ?
| +---+
| Yes No-+017|Replace Memory Module Package 1 (8525)
| | +---+or S2 (8530)
| +-+-+
| |018|Replace Memory Module Package 2 (8525)
| +---+or S1 (8530)
+-+-+
|019|
+---+
The adapter memory failed. Go to 'UNDETERMINED Problems'.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.