Symptom-to-FRU index - (NF 8500R - Type 8681)

  Symptom-to-FRU index


Notes:

1.  Check the configuration before you replace a FRU. Configuration problems can cause false errors and symptoms.
2.  For IBM devices not supported by this index, refer to the manual for that device.
3.  Always start with 'General checkout'.

The Symptom-to-FRU Index lists symptoms, errors, and the possible causes.
The most likely cause is listed first.

Use this Symptom-to-FRU Index to help you decide which FRUs to have available when servicing the computer.
It is divided into the following sections:

•  Beep symptoms.
•  No beep symptoms.
•  Power supply LED errors.
•  Power control card LED.
•  Server component fault indicators.
•  Diagnostic error codes.
•  Other error symptoms.
•  POST error codes.
•  DASD LEDs for hardfiles running in a RAID environment.
•  SCSI errors.
•  SM BUS error (3-3-2).
•  Undetermined problems.
•  System management codes.
•  System Management Interrupt (SMI) Handler.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.