Checking the System for Damage
This section provides instructions on what to do if the server might be damaged.
After dropping it: Look for loose cables and obvious damage.
If any cables are loose, reconnect them securely.
If you see no damage, turn on the server.
If it works correctly, the server probably did not suffer any damage.
Observe all electrostatic precautions listed in this manual to avoid damage to the server.
If the server does not work correctly, turn it off and check the adapters and memory modules to ensure that they are connected correctly; then, reseat all adapters and memory modules.
If the server still does not work correctly, run the diagnostic tests from diagnostic utility menu.
For information about running tests, see 'Running diagnostic programs'.
After spilling liquid on it: If liquid gets on the keyboard:
If liquid gets inside the monitor:
If liquid gets inside the server:
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.