Netfinity Advanced System Management Processor
The following information is about the Netfinity Advanced
System Management Processor that is integrated in the
Netfinity 5500 M20. It also describes how to access the
Netfinity Advanced System Management Processor without
Netfinity Manager.
Note:
To use all of the functions of the Netfinity Advanced
System Management Processor, you must install the
Advanced System Management service for Netfinity
Manager. You also will need a user-provided modem
attached to serial port A to use the remote functions.
Refer to 'Serial ports' for information about serial port A.
The Advanced System Management service gives you the
ability to configure and monitor many features of the
server's Netfinity Advanced System Management
Processor. You can connect to, and directly access and
control, the Netfinity Advanced System Management
Processor of a remote system. With the Advanced System
Management service you can configure Advanced System
Management service events (such as POST, loader, and
operating system timeouts; and critical temperature and
voltage failures). If any of these events occur, the
Advanced System Management service can be configured
to automatically forward a Netfinity alert in one of three
ways:
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.