Installing IPSSEND and IPSMON for OS/2, Windows NT, or NetWare

Installing IPSSEND and IPSMON for OS/2, Windows NT, or NetWare

To install these programs for OS/2, Windows NT, or NetWare:

1.  Start the server.
2.  After the operating system loads, insert the IBM ServeRAID Command Line Programs Diskette   into the diskette drive.
3.  If you are using NetWare, go to (below) step 5.
    If you are using Windows NT or OS/2, create an IPSADM directory on the hard disk drive.
    To do this, go to the operating system command prompt and type:

     md c:\ipsadm

   Notes:

   1.  The c  represents the drive where OS/2 or Windows NT is installed.
   2.  If you installed the Administration and Monitoring Program files, you already created this directory.

4.  Press Enter.
5.  Copy the IPSSEND.EXE file to the hard disk drive by typing one of the following at the command prompt:
   •  For OS/2, type:

       copy a:\os2\ipssend.exe c:\ipsadm

   •  For Windows NT, type:

       copy a:\nt\ipssend.exe c:\ipsadm

   •  For NetWare, type:

       copy a:\netware\ipssend.nlm c:\nwserver

     Notes:

     1.  The a  represents the drive assignment for the diskette drive that contains the ServeRAID diskette.
     2.  The c  represents the drive where OS/2, Windows NT, or NetWare is installed.
     3.  These instructions assume that you installed NetWare in the NWSERVER directory.

6.  Press Enter; then, copy the IPSMON.EXE file to the hard disk drive by typing one of the following at the command prompt:
   •  For OS/2, type:

       copy a:\os2\ipsmon.exe c:\ipsadm

   •  For Windows NT, type:

       copy a:\nt\ipsmon.exe c:\ipsadm

   •  For NetWare, type:

       copy a:\netware\ipsmon.nlm c:\nwserver

     Notes:

     1.  The a  represents the drive assignment for the diskette drive that contains the ServeRAID diskette.
     2.  The c  represents the drive where OS/2, Windows NT, or NetWare is installed.
     3.  These instructions assume that you installed NetWare in the NWSERVER directory.

7.  Press Enter; then, refer to Chapter 5, 'Starting and Using the Utility Programs' for information  to start and use the IPSSEND and IPSMON programs.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.