Installing the Files for OpenServer 5.0.2 and 5.0.4


Installing the Files for OpenServer 5.0.2 and 5.0.4

To install files for OpenServer Versions 5.0.2 or 5.0.4 using an IDE CD-ROM drive:

  1.  Type the following at the BOOT prompt:

      restart link=ipsraid Srom=wd(0,0,0,0)

    Note: The ATAPI BTLD (which includes the wd driver) is included in OpenServer 5.0.2 and 5.0.4.

     The fields for the ATAPI CDROM are:

      Srom=wd(c,d,l,b) where:

      c = primary (0) or secondary (1) IDE/EIDE controller
      d = master (0) or slave (1) device
      l = LUN of device (always 0 with ATAPI or "wd" driver)
      b = BUS of device (always 0 with ATAPI or "wd" driver)

  2.  Let the system start normally until it comes to the select Media options.

  3.  To install with OpenServer 5.0.2:

    1.  Select Adapter type as WD.
    2.  Select Media Type as SCSI CDROM.
    3.  Select ID, BUS and LUN as 0.
    4.  Go to step 5.

  4.  To install with OpenServer 5.0.4:

    1.  Select Media Type as IDE CDROM Drive.
    2.  Select Primary Adapter and Master Device.
    3.  Go to step 5.

  5.  You have completed the installation.


Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.