Status indicators

Status indicators

Power-On Light

This light comes on when you turn on the server by pressing the power switch.

Hard Disk Drive In-Use Light

This light comes on when the server is accessing a SCSI hard disk drive. If this light remains illuminated, it might indicate that either the SCSI bus or the system microprocessor has stopped.

Ethernet Activity Light

This light comes on when the Ethernet controller is transmitting data to or receiving data from another system in the network.

Ethernet Diagnostic LED

The server contains a diagnostic light-emitting diodes (LEDs) for the Ethernet connector located on the rear panel of the server.

When the green LED is on, it indicates that the Ethernet controller is connected to a hub or switch and is receiving link pulses. This LED is also known as the Link OK light.
When the amber LED is on, it indicates that the Ethernet network is operating at 100 Mbps. When this LED is off, it indicates that the Ethernet network is operating at 10 Mbps.

CD-ROM Drive In-Use Light

This light comes on when the CD-ROM drive is accessed.

Diskette Drive In-Use Light

This light comes on when the diskette drive is accessed.

Back to

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.