ISA and PCI Adapters


ISA and PCI Adapters

The server uses a riser card for expansion. The riser card contains expansion slot connectors that connect adapters to the industry standard architecture (ISA) and peripheral component interconnect (PCI) buses.

You can install a variety of adapters in the expansion slot connectors on the riser card. For information on locating the riser card, see System Board Illustration 8476 / 8477.

For an illustration of the expansion slots that are located on the rear of the server, see Input/Output Connectors.

The riser card in the server has three dedicated ISA slot connectors and three dedicated PCI slot connectors.

Notes:

  1.  Alert on LAN and Asset ID are available on some models only.
  2.  If you attach a 4-position cable connector to the  2-pin Modem Wakeup connector, ensure that the  unused positions are next to the bottom of the riser card ,  If this cable is incorrectly attached, the server might  automatically restart each time that you Power-off the power.


  - Attention - To avoid possible damage to adapters and server components, be sure that the adapters that you install do not touch each other or the other components (such as the microprocessor) inside the server.


Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.