Obtaining Drive Status (ServeRAID)

Obtaining Drive Status

Use the following procedure to see the ID, capacity, type of errors that occurred, and other information about each of the hard disk drives attached to the ServeRAID adapter.
  1.  Start the RAID configuration program (see 'Starting the ServeRAID Configuration Program')
  2.  Select Rebuild/Device Management from the Main Menu.
  3.  Select Display Drive information from the Rebuild/Device Management Menu. The cursor becomes  active in the Bay/Array selection list.
  4.  Use the Up Arrow (  )  key or the Down Arrow (  ) key to highlight each of the drives  shown in the Bay/Array selection list.  As a drive is highlighted, the drive information appears.


  5.  Press Esc to return to the previous menu.


Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.