Updating the System BIOS


Updating the System BIOS

  Important:

Updating the System BIOS might overwrite the existing configuration and reset it to the system default values.

Before you begin this procedure, make sure that you have recorded the settings of the configuration.
To do that, go into the Configuration/Setup Utility program and record the information.

You can record the information on a piece of paper or in the Server Records and Specifications tables found in the Hardware Information section of the Server Library.

If you need information about the Configuration/Setup Utility program, refer to the documentation that comes with the server.

After you have recorded the information, continue with this procedure.


Complete this procedure to update the system BIOS:

  1.  Insert the IBM Netfinity 5500 BIOS Update Diskette  in  the diskette drive.
  2.  Press Ctrl+Alt+Del to restart the server.  The system begins the power-on self-test (POST).
  3.  Select 1 - Update POST/BIOS from the menu that  contains various flash (update) options.
  4.  Select Y when you are asked if you would like to  move the current POST/BIOS image to the backup  ROM location.
  5.  Select N when you are asked if you would like to  save the current code to a diskette.
  6.  You will be asked to choose which language you wish to use.
     Select your language (0-7) and press Enter to accept  your choice. When complete, you will be prompted to  remove the diskette and press Enter to restart the system.
  7.  Remove the diskette and go to Updating the Advanced System Management Processor Code.

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.