The Configuration/Setup Utility Program
For most configurations, the server will operate using the default system settings.
You need to change the settings only to resolve configuration conflicts or to enable or
change device functions (for example, defining diskette types, and so on).
When you want or need to change the default settings, the Configuration/Setup Utility program
provides a convenient way to display and change the settings.
After you run and exit from the Configuration/Setup Utility program, configuration information is stored in electrically
erasable programmable read-only memory (EEPROM).
While the server is off, the configuration information remains available for the next system startup.
Always run the Configuration/Setup Utility program if you add, remove, or relocate any hardware option,
or if you receive an error message instructing you to do so.
Review this chapter and the information that comes with the option before making changes.
Also, record the current settings before making any changes.
To start the Configuration/Setup Utility program:
The Configuration/Setup Utility main menu appears. For information about the menu, see
'Using the Configuration/Setup Utility Main Menu'.
Note: When the message Press F2 for Diagnostics appears, press F2
to run the diagnostics programs.
For information about running the diagnostics programs, see 'Diagnostic Programs'.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.