Expansion Unit Option Switches - EXP200 Type 3530 - 1RU, 1RX

Expansion Unit Option Switches
 

The expansion unit has two types of ID numbers:

Drive SCSI IDs	Identifies each drive in the expansion unit.
Tray ID	identifies each expansion unit

Switch settings are as follows:

•  Option Switches
  •  Switch 1 off (default)
    •  Bus 1 and 2 as Single Bus 1, accessing all ten drives, (IDs 0-4 and 8-12).
  •  Switch 1 on
    •  Bus 1 and Bus 2 accessing 5 drives each.
       Bus 1 accessing IDs 0-4
       Bus 2 accessing IDs 0-4
  •  Switch 5 off (default)
    •  Rack Mode
  •  Switch 5 on
    •  Tower Mode
       When Option Switch 5 is in the On position, two changes occur. First, the SCSI ID  ordering is reversed, providing IDs in ascending order from top to bottom.
       Second, the general system error indicator on the front panel is swapped with the  power-on LED, placing the green power-on LED above the general-system error indicator.
  •  Switches 2 through 4 are reserved and must remain off.
•  Tray Number Switch

  •  Identifies each expansion unit 0-9.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.