Specifications - EXP200 Type 3530 - 1RU, 1RX
Specifications
Size
- With front panel:
- Depth: 56.3 cm (22.2 in.)
- Height: 12.8 cm (5 in.)
- Width: 44.7 mm (17.6 in.)
Weight
- Typical expansion unit as shipped: 22.5 kg (49.5 lb)
Electrical Input
- Sign-wave input (50 to 60 Hz)
- Low range:
Minimum: 90 V ac
Maximum: 127 V ac
- High range:
Minimum: 198 V ac
Maximum: 257 V ac
- Input Kilovolt-amperes (kVA) approximately:
- Minimum configuration: 0.06 kVA
- Maximum configuration: 0.36 kVA
Environment
- Air Flow: Air flow is from front to back
- Air temperature:
- expansion unit on:
10° to 35° C (50° to 95° F)
Altitude: 0 to 914 m (3000 ft.)
- expansion unit on:
10° to 32° C (50° to 90° F)
Altitude: 914 m (3000 ft.) to 2133 m (7000 ft.)
- Humidity:
Acoustical Noise Emissions Values
For open bay (0 Hard Disk Drives installed) and typical system configurations
(8 hard Hard Disk Drives installed).
- Sound Power (idling):
- 6.3 bels (open bay)
- 6.5 bels (typical)
- Sound Power (operating):
- 6.3 bels (open bay)
- 6.6 bels (typical)
- Sound Pressure (idling):
- 47 dBA (open bay)
- 49 dBA (typical)
- Sound Pressure (operating):
- 47 dBA (open bay)
- 50 dBA (typical)
These levels are measured in controlled acoustical environments according to ISO 7779 and are reported in
accordance with ISO 9296.
The declared sound power levels indicate an upper limit, below which a large portion of machines operate.
Sound pressure levels in your location might exceed the average 1-meter values stated because of room reflections and other nearby noise.
Back to
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.